Bulldozer Seat in Delaware - You can expect next day delivery on all parts and attachments for John Deere, Dresser, Caterpillar, Doosan, and several other recognized brands. We have built up our multinational status through extraordinary customer support.
Forklifts powered by propane are common inside warehouse settings. These forklifts have a propane mount situated behind the operator. These tanks have to be replaced every so often as they have limited lifespans. Drivers of forklifts should use care when handling propane tanks. Compressed gases are very hazardous, specially since the gas is flammable. Use care when replacing and removing propane tank to avoid injury.
1 To change a propane tank, first stop the forklift and leave the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This process burns off the gas inside the transfer hose which connects the engine and the tank. Prior to taking the next steps, put on the correct safety equipment, like for instance insulated gloves made of either leather or neoprene. It is important for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to foam around the value. If this occurs, check the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks around the valve area, and after that perform the leak checking process once more. Persistent leaks mean that the connecting hose and nut should be replaced. However, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. Afterward you could start the forklift and continue operating.
Since 2011, the Linden Comansa company has offered its clients the LC 1600 series tower cranes. This series includes the models: 16 LC 185, 16 LC 260 and 16 LC 220. These models are available in various kinds of maximum load. The LC 1600 series design enables Comansa to keep their fundamental premises, such as modularity and easiness of assembly and transport.
This particular series has a load capacity of 8 to 12 tons. The LC1100 cranes provide a 5 to 8 ton load capacity, whilst the bigger LC2100 model supports loads from twelve to forty eight tons. In addition, the LC1600 family brings together the benefits of both series which shares various elements.
The family of tower cranes which has been engineered with every advantage known and proved by Linden Comansa's Flat-Top modular system is the LC 2100. This series incorporates a lot of innovations in the particular equipment.
The LC 2100 series has 4 Flat-Top crane models: the 21 LC 400, 21 LC 290 and the 21 LC 550. The latest addition to the series is the 21 LC 750. The 21 LC 750 crane is the biggest in the series. It is outfitted with 7 tons of jib-end load and eighty meters of jib length. This tower crane offers a maximum load of forty eight tons.
Comansa offers the LC3000 series that is formed by 2 models, the 30 LC 1100 and the 30 LC 1400 and each one is available with 3 different versions depending on their maximum load capacity. The ranges of load capacities are 32, 48 and 64 tons or 70,550; 105,820 and 141,090 lbs.. The biggest Flat-Top tower cranes have mainly been designed for construction and mining applications, public works and heavy industry.
The Linden Comansa company has manufactured large capacity cranes for a lot of years. Since designing this series, the overall production and delivery timeframes are presently a lot shorter. The company has maintained highly competitive pricing for their equipment.
